Bobcat 763 Specs: Horsepower, Weight, and Parts

The Bobcat 763 has been running on farms and small job sites for nearly 30 years, and the majority of surviving units trace back to one engine: the Kubota V2203 diesel producing 46 horsepower. With a 5,310 lb operating weight and 1,500 lb rated operating capacity, the 763 sits in the sweet spot for compact work. Parts availability remains strong across every major wear category.

Bobcat 763 Quick Specs

• Engine: Kubota V2203 naturally aspirated diesel, 46 HP (35 kW)
• Operating weight: 5,310 lb (2,409 kg)
• Rated operating capacity (ROC): 1,500 lb (680 kg)
• Tipping load: 3,000 lb (1,361 kg)
• Lift height to pin: 112 in (2,845 mm)
• Production years: 1995 to 2001
• Serial number range: starts at 512211001 (G-Series)

What Are the Complete Bobcat 763 Specs?

Beyond the headline numbers, the 763 is a hydrostatic-drive skid steer with a 10.5 GPM auxiliary hydraulic flow rating (standard flow) and 2,900 PSI system pressure. The fuel tank holds 17 gallons, giving most operators a full workday before refueling. Ground clearance sits at 8.1 inches, and the machine runs on standard 10x16.5 tires or optional 12x16.5 for soft-surface work.

The 763 was released with the G-Series platform in 1995 as a mid-size skid steer between the lighter 753 and the heavier 773. It replaced the Melroe-era 743B in the product line and introduced operator-comfort improvements that carried forward into later S-series models.

What Engine Is in the Bobcat 763?

Every 763 was built with the Kubota V2203 four-cylinder naturally aspirated diesel. Displacement is 2.2 liters, rated power is 46 HP at 2,800 RPM, and peak torque lands around 100 lb-ft. The V2203 is known for long service life with consistent maintenance (oil and filter every 250 hours, fuel filter every 500 hours, air filter as needed).

The Kubota engine lineage is a significant asset for 763 owners. Because the V2203 was produced for decades across multiple equipment brands, filter cross-references, gasket kits, and rebuild parts remain widely available. According to Kubota's service publications, the V2203 series is one of the longest-supported industrial diesels in the compact equipment category.

How Much Does a Bobcat 763 Weigh?

Operating weight on a standard 763 is 5,310 lb (2,409 kg). Shipping weight (dry, no bucket) runs slightly lower at around 4,950 lb. Weight matters for two reasons: trailer selection (most half-ton tow vehicles need a heavier-duty trailer for a 763 plus bucket) and underground work, where ground pressure affects what surfaces you can run on without damage.

What's the Bobcat 763's Rated Operating Capacity?

Rated operating capacity (ROC) is 1,500 lb, calculated at 50 percent of tipping load per SAE J818 standard. Tipping load is 3,000 lb. In practical terms, that means the 763 can safely pick, carry, and dump loads up to 1,500 lb without risking a tip-forward incident on flat ground. Sloped or uneven ground reduces the effective ROC significantly.

What Years Was the Bobcat 763 Built?

Production ran from 1995 through 2001, entirely within the G-Series generation. The G-Series designation refers to the chassis and cab platform generation, not a sub-variant suffix. Serial numbers starting at 512211001 identify the 763 specifically. Later production runs incorporated minor cab improvements but kept the same mechanical drivetrain throughout.

What's the Difference Between the 763, 763G, and 763H?

There is no official 763H variant. The 763G label is sometimes used informally to emphasize the G-Series generation, but the machine is simply "Bobcat 763" in Bobcat documentation. This is a frequent source of confusion when ordering parts. If a listing says "fits 763G," it should fit any 763 built 1995 to 2001.

The successor models (S185, S205) introduced the M-Series platform in 2003 and carry different part numbers. Do not assume cross-compatibility between 763 and the S-series machines. Always verify fitment against the 763's serial range.

Are Bobcat 763 Parts Still Available?

Yes, across nearly every maintenance and wear category. Based on our catalog data, the most in-demand 763 parts are:

• Filters: oil, fuel, hydraulic, air, cabin
• Hydraulic seals and cylinder rebuild kits
• Drive and auxiliary drive chains
• Tires and rims in the 10x16.5 and 12x16.5 sizes
• Glass (door, side, rear) and door seals
• Bob-Tach levers and quick-attach hardware
• Electrical: alternator, starter, glow plugs, wiring harnesses
• Engine rebuild kits and gasket sets for the V2203

Browse current stock at Bobcat 763 parts.

What Are the Most Common Bobcat 763 Parts to Replace?

Our parts specialists see consistent replacement patterns across 763 orders. The top five categories, in rough order of frequency, are hydraulic filters (every 500 hours or annually), door glass (vibration and debris damage), Bob-Tach lever springs (wear out with repeated attachment swaps), auxiliary drive chains (tension and stretch over time), and door seals (weathering and compression set).

None of these are difficult DIY jobs with the right tools. The hydraulic filter and door glass are both under 30-minute swaps for most operators. Consult a certified mechanic for engine internal work or hydraulic system rebuilds.

How Do I Find the Right Bobcat 763 Part Number?

The 763's serial number is the authoritative lookup key. It is stamped on a metal plate inside the cab, typically on the rear pillar behind the operator's head. Serial numbers for the 763 start at 512211001 and run through the end of production in 2001.

Cross-reference your serial against the supplier's listed fitment range before ordering. Bobcat's own parts catalogs publish the serial breakpoints where part revisions occurred. For help matching a specific serial to the current aftermarket cross-reference, email sales@partsonline.com.

How Do I Decode My Bobcat 763 Serial Number?

The 763 uses a 9-digit serial number format preceding the ISO 17-character PIN era. The first four digits identify the model and production run (5122 for the 763). The remaining five digits are the sequential production number within that run.

For a full walkthrough on finding and decoding Bobcat serial numbers, see our Bobcat skid steer serial number guide.

Frequently Asked Questions

Is a 763 Bobcat a good machine?

The 763 is one of the most respected Bobcat skid steers of its era. The Kubota V2203 engine is reliable, the hydraulic system is straightforward to service, and parts remain widely available more than 20 years after production ended. Still a workhorse on small farms and light construction sites.

How much is a Bobcat 763 worth?

Value depends on hours, condition, and local market demand. For parts-sourcing purposes, a running 763 is worth restoring because nearly every wear part is still available through aftermarket channels.

What problems are common with a Bobcat 763?

Most issues are age-related rather than design flaws: hydraulic cylinder seal leaks, drive belt stretch, door glass cracking from vibration, Bob-Tach lever spring fatigue, and occasional alternator or starter failures. All are repairable with readily available aftermarket parts.

How much can a Bobcat 763 lift?

Rated operating capacity (ROC) is 1,500 lb at 50 percent of tipping load (3,000 lb). Always stay within ROC for safe operation on flat ground, and derate for sloped or uneven terrain.

What years was the Bobcat 763 made?

Production ran from 1995 through 2001 entirely within the G-Series generation. Serial numbers start at 512211001.

Where can I find Bobcat 763 specs as a PDF?

Bobcat publishes historical spec sheets through dealer resources. A practical spec summary for parts sourcing is covered in this guide and in the partsonline.com catalog listings by serial range.

Can I still get an engine rebuild kit for a 763?

Yes. Complete Kubota V2203 rebuild kits including pistons, rings, gaskets, and bearings are available through aftermarket suppliers. The V2203 is one of the longest-supported industrial diesels in its class.

Shop Bobcat 763 parts, or explore related models: Bobcat 773 parts and Bobcat 753 parts. For fitment verification, email sales@partsonline.com with your serial number.