Washers Spacers and Grommets

Browse aftermarket washers, spacers, and grommets for skid steer loaders and compact track loaders, including spring and cast washers, machined spacers, rubber grommets, and hardware kits.

Match your part by OEM part number, since thickness and inside diameter both matter. Details are listed on each product page.

Washer, Spacer, and Grommet Fitment and Compatibility

Three different jobs share this page, and each one fails differently when the part is left out or substituted. Common replacements include the cast washer replacing OEM 7167846, the spring washer replacing OEM 7211397, the washers replacing OEM 6810627, 6677841, 6534111, and 27E10, the hanging deck spacer replacing OEM 4178684, the grommet replacing OEM 7266067, the door plate replacing OEM 7164590, and the cab lock down kit replacing OEM MBC9994.

Thickness is the specification people skip. A spacer or washer of the correct diameter but the wrong thickness changes where a component sits, and on a linkage that shows up as end float, a rubbing edge, or a bolt that no longer runs the intended number of threads into its hole.

Types of Replacement Washers, Spacers, and Grommets

Washers spread clamp load across a wider area so the fastener does not pull into softer material, and spring washers add tension that resists loosening under vibration. A spring washer that has been reused until it is flat has stopped doing the one job it was fitted for, which is why they are cheap and meant to be replaced with the joint.

Spacers set and hold position. They control side play in a linkage, set the gap in a mount, and take up length where a shaft passes through more than one member. They are machined parts rather than generic hardware, and this is where matching the OEM number matters most on this page.

Grommets protect anything passing through a hole in metal. A wiring harness or hose that runs through a bare panel edge has a cut waiting for it, and the grommet is what stands between the two. Where a harness has already failed at a bulkhead, fit the grommet at the same time as the repair, or the new harness meets the same edge.

Browse More Hardware and Fasteners

Browse by Equipment

Skid Steer Parts

Track Loader Parts

Related Part Types

Bolts Screws and Studs