Bobcat T650 Specs and Dimensions Parts OnlineNov 17, 2026 Share The Bobcat T650 is a vertical-lift compact track loader rated at 2,570 lb operating capacity, which is 35% of its 7,343 lb tipping load. It carries a 74 hp turbo diesel, 23 gpm of standard auxiliary flow and a 124 in hinge pin height. Operating weight, fuel capacity and travel speed changed between model years, so match the specs to your serial number. At a Glance Lift: 2,570 lb rated operating capacity on the standard solid-mounted undercarriage, 7,343 lb tipping load. Power: 74 hp. The 2015 manual lists a Kubota V3307 turbo diesel at 74.3 hp gross and 70.3 hp net on Interim Tier 4 units. Lift path: vertical, with 124 in to the hinge pin and 96.3 in of dump height. Size: 108.4 in long without an attachment, 72.9 in wide over standard tracks, 81.3 in to the top of the cab. Hydraulics: 23 gpm standard flow. Earlier units offered a 30.5 gpm high-flow option. Changes by year: operating weight runs 9,113 to 9,440 lb and the fuel tank is 23.9 or 27.2 gal, depending on the series. What Are the Bobcat T650's Key Specs? Bobcat prints the full T650 spec list in each Operation and Maintenance Manual and a shorter list in its sales brochures. The table compares the 2015 manual for serial numbers A3P011001 to A3P019999 with Bobcat's 2024 M3-Series compact loader brochure, which covers the current machine. Spec 2015 manual (S/N A3P011001 to A3P019999) 2024 M3-Series brochure Rated operating capacity 2,570 lb 2,570 lb Tipping load 7,343 lb 7,343 lb Operating weight 9,440 lb 9,113 lb Horsepower 74.3 hp gross, 70.3 hp net 74.0 hp Height to hinge pin 124 in 124.0 in Standard auxiliary flow 23.0 gpm 23.0 gpm High-flow option 30.5 gpm Not listed Top speed, single speed / two-speed 6.6 mph / 10.7 mph 6.2 mph / 10.0 mph Fuel tank 27.2 gal 23.9 gal Standard track width 12.6 in 12.6 in All figures are for the standard solid-mounted undercarriage. Capacity, tipping load, hinge pin height and flow match across both documents. Weight, fuel and speed do not, which is why spec sheets for different years disagree. How Much Horsepower Does a Bobcat T650 Have? Every T650 is rated at about 74 hp. The 2015 Operation and Maintenance Manual gives three ratings for the same engine because each test standard measures power differently: Engine: Kubota V3307-DI-TE3 Interim Tier 4, 4 cylinders, 3.3 L (203 cu in), turbocharged and liquid cooled. Power: 74.3 hp SAE J1995 gross, 73.2 hp ISO 14396 gross and 70.3 hp SAE J1349 net, all at 2,400 rpm. Torque: 195.0 ft-lb gross and 186.7 ft-lb net at 1,600 rpm. In April 2014 Bobcat released Tier 4 versions of its 600 frame loaders, the T650 among them, at 74 hp. Launch coverage reported that the engine met Tier 4 without a diesel particulate filter and that the engine oil and filter interval rose from 250 to 500 hours. Bobcat's 2024 brochure lists 74.0 hp but does not name the engine maker, so on a later machine read the engine serial plate, on the side of the engine behind the alternator, before ordering engine parts. How Much Can a Bobcat T650 Lift? Bobcat rates the T650 at 2,570 lb, which is 35% of its 7,343 lb tipping load. That rated operating capacity (ROC) is the number on the cab decal. Some listings quote 3,670 lb, which is the 50% of tipping load figure Bobcat's brochure also prints, not the ROC. Undercarriage ROC With 200 lb counterweight With 300 lb counterweight Solid-mounted (standard) 2,570 lb 2,670 lb 2,745 lb Roller suspension (option) 2,350 lb 2,450 lb 2,525 lb The roller suspension undercarriage lowers the tipping load to 6,714 lb, per the 2015 manual. The same manual lists these forces for the solid-mounted machine: Lift breakout force: 6,400 lb Tilt breakout force: 5,885 lb Push force: 6,400 lb Bobcat notes that longer buckets move the load center forward and reduce the ROC. It suggests counterweights for pallet forks, grapples and loose material, and removing them for digging and breaker work. What Are the Bobcat T650 Dimensions? The 2015 manual measures the T650 on standard 12.6 in tracks with a 74 in heavy-duty construction and industrial bucket. A different bucket changes the length, reach and dump figures. Dimension Inches Millimeters Length without attachment 108.4 2,753 Length with 74 in bucket 136.8 3,474 Height to top of cab 81.3 2,065 Height to hinge pin, fully raised 124 3,149 Overall operating height, bucket raised 158.5 4,026 Dump height at 42° dump angle 96.3 2,447 Dump reach at maximum height 34.2 870 Width over standard tracks 72.9 1,851 Width with bucket 74 1,880 Turning radius, front with bucket 87.7 2,228 Turning radius, rear 64.3 1,633 Ground clearance 8.1 207 Bobcat's 2024 brochure gives the same 124 in hinge pin height, 81.3 in cab height and 74 in width with bucket for the current machine. Some dealer listings show 36 in of reach at maximum height instead of 34.2 in, so measure your own setup if truck clearance is tight. Is the Bobcat T650 Radial or Vertical Lift? Vertical. Bobcat's M3-Series brochure lists the T650 lift arm path as vertical and says a vertical path "provides higher lift capacity and more reach at full lift height than radius lift path." In practice that means: High loading: maximum reach arrives at full height, which Bobcat says makes it easier to clear high-sided truck boxes and hoppers. Load stays close: the linkage keeps the load nearer the machine as the arms rise. The tradeoff: Bobcat describes radius lift as giving maximum reach at truck bed height, which suits mid-height dumping and backfilling. The lift path is built into the loader arm linkage, so it is a reason to choose one model over another, not something you can change later. How Fast Is a Bobcat T650, and What Tracks Does It Use? Top speed depends on the year and on whether the machine has the two-speed option: 2015 manual: 6.6 mph single speed. The two-speed option runs 6.1 mph in low range and 10.7 mph in high. 2024 brochure: 6.2 mph in low range and 10.0 mph in high with the optional two-speed. 8.7 mph: some dealer listings show this for the two-speed. We did not find it in any Bobcat document. Track Width Ground pressure, solid-mounted Standard rubber, C-pattern 12.6 in (320 mm) 5.8 psi (2015 manual), 5.7 psi (2024 brochure) Optional rubber, C-pattern 17.7 in (450 mm) 4.1 psi Bobcat's 2024 brochure lists 57.7 in of track on the ground. Tracks are tensioned by a grease cylinder and spring, and the 2015 manual says to check tension every 8 to 10 hours for the first 24 hours, then every 50 hours. Why Do Bobcat T650 Specs Differ by Model Year? The T650 has been built across several loader series since 2009, and Bobcat revised it at each step. That is why spec sheets from different years do not match line for line. 2009: Bobcat launched the M-Series loaders. Trade press reported the S650 and T650 became available that August, and a 2010 report listed the T650 at 2,570 lb ROC and 9,440 lb. 2014: the Tier 4 T650 arrived at 74 hp and a reported 9,321 lb operating weight. 2016: Bobcat's own timeline marks the start of the M2-Series loaders. 2024: Bobcat's brochure lists the T650 as an M3-Series loader at 9,113 lb, with a 23.9 gal tank, a 10.0 mph two-speed top speed and no high-flow figure. Parts follow the serial number, not the model year. The serial plate is on the outside of the loader frame, and the 2015 manual explains that the first four characters identify the model and engine combination and the last five give the production sequence. What Hydraulic Flow and Pressure Does the T650 Have? Standard auxiliary flow is 23 gpm in every Bobcat T650 document we checked. That flow runs most standard-flow attachments, while high-flow tools need the option where it was offered. Standard flow: 23.0 gpm (87.1 L/min) from an engine-driven gear pump. High flow: a 30.5 gpm option in the 2015 manual. The 2024 brochure lists no high-flow figure for the T650. Relief pressure: 3,450 to 3,550 psi at the quick couplers (2015 manual), or 3,500 psi system pressure (2024 brochure). Cylinders: two lift and two tilt cylinders, all with a 3.00 in bore. Rods are 1.75 in (lift) and 1.50 in (tilt). Cycle times: raise 3.9 s, lower 2.6 s, dump 2.3 s, rollback 1.7 s. The drive is fully hydrostatic, with tandem piston pumps driving two drive motors, and it shares one hydraulic/hydrostatic fluid with the loader circuits. If a tilt cylinder starts weeping at the rod, our T650 tilt cylinder seal kit guide covers the symptoms and the rebuild. How Big Is the T650 Fuel Tank, and What Are Its Fluid Capacities? Bobcat's documents give two fuel tank sizes: 27.2 gal in the 2015 manual and 23.9 gal in the 2024 brochure. Some listings and spec sites show 41 to 43.9 gal, which matches no Bobcat T650 document we found and is close to the 43.8 gal Bobcat lists for the larger T740 and T770. Item (2015 manual, S/N A3P011001 to A3P019999) Capacity Fuel tank 27.2 gal (103.1 L) Engine oil with filter change 12.0 qt (11.4 L) Cooling system 3.1 gal with heater, 3.0 gal without Hydraulic/hydrostatic reservoir 2.7 gal (10.2 L) Hydraulic/hydrostatic system 11.9 gal (45.0 L) Hydrostatic drive motor, each 6.1 fl oz (180 mL) The manual specifies Bobcat hydraulic/hydrostatic fluid for the system and a high-performance synthetic oil for the drive motors. For other machines, see our Bobcat fluid capacities and service specs by model. Which Filters and Maintenance Parts Fit the T650? The 2015 manual's Regular Maintenance Items list gives these Bobcat part numbers for serial numbers A3P011001 to A3P019999, with the note to always verify part numbers with your dealer. Based on our catalog data, the T650 shares its air filters and hydraulic tank filter with the T630, S630 and S650. Each part below is available as an aftermarket replacement that meets or exceeds OEM specifications. Engine oil filter 6678233: Engine Oil Filter, replacement for Bobcat 6678233 Fuel filter 6667352: Fuel Filter with Water Separator, replaces Bobcat 6667352 Outer air filter 7008043: Outer Air Filter, replacement for Bobcat 7008043 Inner air filter 7008044: Inner Air Filter, replacement for Bobcat 7008044 Hydraulic filter 7002734: Hydraulic Oil Tank Filter, replacement for Bobcat 7002734, for the hex-head filter cap. The manual lists 7012314 for the square-head cap and 7248874 for the bolt-on cap. Also on the list: charge filter 6692337 (earlier models) or 6686926 (later models), and hydraulic fill and breather cap 6727475. On these Interim Tier 4 units, the manual's schedule calls for the fuel filter and engine oil at 250 hours, the charge filter and reservoir breather at 500 hours, and the hydraulic filter and fluid at 1,000 hours, or every 12 months. Later Tier 4 units moved engine oil to 500 hours, so follow the schedule for your serial number. Each listing shows fitment for the T650, but part numbers can change by serial range, so send your serial number and the OEM number to sales@partsonline.com and we will confirm it. Browse everything in Bobcat T650 parts, and consult a certified mechanic for engine or hydraulic repairs. Frequently Asked Questions How many horsepower is a Bobcat T650? About 74 hp. Bobcat's 2015 manual rates the Kubota V3307 engine at 74.3 hp gross and 70.3 hp net, and the 2024 brochure lists 74.0 hp. How much horsepower does a bobcat have? It depends on the model. Bobcat's 2024 M3-Series brochure lists loaders from 23.5 hp (S70) to 92 hp (S770 and T770), with the T650 at 74 hp. How much can a bobcat lift with forks? The T650's rated operating capacity is 2,570 lb on the standard undercarriage, or up to 2,745 lb with the 300 lb counterweight kit. Bobcat says the maximum load for a pallet fork is on a decal on the fork frame and varies by fork model, so check that decal and stay within the lower figure. What skid steers to stay away from? Rather than ruling out a brand or model, judge the individual machine. On a used T650, ask for service records and the serial number, and check the tracks, the lift and tilt cylinders for leaks, and the loader pivots for play. What is the Bobcat T650 lift capacity? The T650 is rated at 2,570 lb, which is 35% of its 7,343 lb tipping load. With the optional roller suspension undercarriage, the rating drops to 2,350 lb. Is there a Bobcat T650 specs PDF? Bobcat publishes the full spec list in the Specifications section of each T650 Operation and Maintenance Manual, which is issued by serial range. The current machine also appears in Bobcat's M3-Series compact loader brochure. Are 2015 and 2019 Bobcat T650 specs the same? The core figures, 2,570 lb capacity, 7,343 lb tipping load, 74 hp, a 124 in hinge pin and 23 gpm, appear in every Bobcat document and launch report we checked from 2010 to 2024. Operating weight, fuel capacity, travel speed and options changed between series, so use the manual for your serial number. Share Previous articleNext article Join Us A short sentence describing what someone will receive by subscribing Your email Subscribe100% free, Unsubscribe any time! Follow us