Kubota SVL90

Parts Compatible with the Kubota SVL90 Compact Track Loader

The original SVL90 is the large frame entry in Kubota's first generation SVL Series compact track loader lineup, sitting above the SVL75 in horsepower, lift capacity, and operating weight. The SVL90 cab variants (SVL90C) include cab glass and HVAC components that the open ROPS station does not have. The platform was eventually replaced by the SVL95-2S in current Kubota production, which uses a Tier 4 final emissions package requiring DEF (Diesel Exhaust Fluid) for the SCR aftertreatment system. Where the SVL90 used a mechanically governed Tier 3 engine without DEF, the newer SVL95-2S adds the DEF tank, the SCR catalyst, and associated emissions sensors. The SVL90 generation is therefore the simpler service platform and is preferred by many operators in markets where DEF logistics is a hassle.

Service parts on the SVL90 cross to the SVL75 in the same generation because Kubota built both machines on a shared component platform. Engine oil filter, fuel filter cartridge, and cab climate components are shared between the SVL75 and SVL90 in most configurations. Cab glass also crosses between SVL75 and SVL90 cab variants because the cab itself is the same dimension across both machine sizes in the original generation. Verify each part by your serial number on the product page.

Common Replacement Parts for the Kubota SVL90

Engine service uses Engine Oil Filter 1C02032433 and Fuel Filter Cartridge RD819-51280, both shared with the SVL75. Cab climate uses Cab Air Filter 6A671-75090 and Cab Filter T1855-71600. Front Idler HV050-22900 covers undercarriage replacement on the original SVL90 chassis (shared with the SVL75 undercarriage in most configurations).

Engine internal service is a meaningful order category on the SVL90 because the larger frame machines accumulate hours faster than the smaller SVL75 in many fleet operations. Head Cover Gasket 1C020-14520 covers valve cover service. Rod Bearing 1C010-22310 is a common engine internal service replacement on machines past 6,000 hours. Door glass Shim RD451-19180 has serial number specific fitment (fits SSV75 family at S/N 50001+ only and select SVL cabs depending on generation, so verify before ordering). Sensor 1J574-59710, Ignition Switch RC461-53960, Key Set RC461-53930, Bulb 32791-91060, O-Ring 04817-50300, and Oil Gauge Plug 1G513-36550 cover routine service hardware.